Information Codes - Samsung MG23J5133A Series User Manual

NOTE
If the above guidelines do not enable you to solve the problem, then contact your local
SAMSUNG customer service centre.
Please have the following information read;
• The model and serial numbers, normally printed on the rear of the oven
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG aftersales service.

Information codes

Check code
C-10
C-20
C-21
C-d0
NOTE
If the above guidelines do not enable you to solve the problem, then contact your local
SAMSUNG customer service centre.
MG23J5133AT_EG_DE68-04328D-00_EN.indd 67
Cause
Cooking sensor is needed to
check.
Temperature sensor is needed
to check.
Temperature sensor detect
higher temperature than
setting temperature.
Control buttons are pressed
over 10 seconds.
Action
Press the Stop/Cancle button and
operate again. If it occurs again, turn off
the microwave oven over 30 seconds
and try setting again.
If it appears again, call your local
SAMSUNG Customer Care Centre.
Turn off the microwave oven for cooling
the product and then try setting again.
If it appears again, call your local
SAMSUNG Customer Care Centre.
Clean the keys and check if there is
water on the surface around key. If it
occurs again, turn off the microwave
oven over 30 seconds and try setting
again. If it appears again, call your local
SAMSUNG Customer Care Centre.
English 67
2015-01-27 4:35:35