Table of Contents
Advertisement
5 Mounting
5 Mounting
5.1
Requirements for Mounting the Sunny Home Manager
☐ The mounting location must be indoors.
☐ The Sunny Home Manager must be installed in a switch cabinet.
☐ The mounting location must be protected against dust, moisture and corrosive substances.
☐ The cable route from the mounting location to the router must not exceed a maximum length of 100 m.
☐ A minimum distance of 1 m must be maintained from devices using the 2.4 GHz radio spectrum (e.g. WLAN
devices, microwave ovens). This will prevent reduced connection quality and data transmission speed.
☐ The ambient conditions at the mounting location must be suitable for the operation of the Sunny Home Manager
(see Section 21, page 124).
5.2
Mounting the Sunny Home Manager on the Top-Hat Rail
Requirement:
☐ The top-hat rail must be securely mounted in the switch cabinet.
Procedure:
1. Press the Sunny Home Manager with the upper retainers into
the upper edge of the top-hat rail.
2. Hook the lower retainers into the lower edge of the top-hat rail.
26
HM-20-BE-en-10
SMA Solar Technology AG
Operating Manual
Advertisement
Table of Contents
