Converting The Interface Connector To 9-Pin D-Sub, Male Connectors; Figure 4.9. Pce37/9Ps Specifications - Contec COM-2(PCI) User Manual

Converting the Interface Connector to 9-pin D-SUB,
Male Connectors
COM-4(PCI)
The optional cable "PCE37/9PS" is available as an option. This
cable converts the CN1 (37-pin D-SUB connector) on the
COM-4(PCI) board to 9-pin D-SUB male connectors for four
channels as shown below.

Figure 4.9. PCE37/9PS Specifications

COM-2(PCI), COM-4(PCI), COM-8(PCI)
External Connection
41