System Reference
Specifications
COM-2(PCI)
Table 6.1. Specification < COM-2(PCI)>
Number of Channels
Input Type
Transfer Method
Baud Rate
Data Length
Parity Check
Controller Chip
Distance
Interrupt Requests
I/O Address
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Dimension
Weight
*1 : These items can be set by software.
*2 : Data transmission at high speed may not be performed
*3 : A single interrupt signal "INTA" is output as a collection
Board Dimensions
62
Item
2
RS-232C
Asynchronous serial transfer
50 - 230,400bps *1 *2
5, 6, 7, 8 bits
1, 1.5, 2 stop bits *1
Even, Odd, Non-parity *1
16552 or equivalent
15m Max.
1 level *3
8 bits x 32 ports
+5VDC, 250mA Max.
0 - 50 ° C
-20 - 60 ° C
20 - 90% (non-condensing)
122.0×107.0×18.5mm (4.7" x 4.2" x 0.7")
100g
For details, refer to the data sheet for the TL16552
equivalent product and see "Baud Rate Setting."
normally depending on the environment including the type
of status of connected external device and the cable length.
of interrupt input signals from two channels.
COM-2(PCI), COM-4(PCI), COM-8(PCI)
Specification