6Es5 434-4Ua12 Digital Input Module - Siemens S5-155U System Manual

Specification Sheets for the Modules
8.4.5
6ES5 434-4UA12 Digital
Input Module
Rated input voltage (LH+)
Rated input voltage (L+)
Number of inputs
Isolation
Input voltage TTL:
CMOS:
Rated input current TTL:
CMOS:
NAMUR:
Internal resistance
Line resistance
Input frequency
Delay time
for positive-going edge
for negative-going edge
Coincidence factor (total load capability)
Permissible line length
Power supply
Digital section from system bus
Supply voltage L+/L-
Current consumption at L+/L-
Current consumption at LH+/LH-
Current output from LH+/LH-
Power dissipation (rated operation)
Enable input (F+/F-)
Rated input voltage
Input voltage for logic 0
for logic 1
Rated input current
Permissible line length
Voltage test to VDE 0160
Mechanical specifications
Dimensions (W x H x D)
Weight
8 - 42
5 to 15 V DC
12 to 24 V DC (NAMUR)
32
Yes, 1 group of 32 inputs
for logic 0 0 to 0.8 V
for logic 1 2.4 to 5.0 V
for logic 0 0 V to 0.3 x LH+
for logic 1 0.7 V x LH+ to 1 x LH+
for logic 0 - 1 mA
for logic 1 0.1 mA or open input
for logic 0 - 1 to - 3 mA (5 to 15 V)
for logic 1 0.1 to 0.3 mA (5 to 15 V)
≤ 1.2 mA
for logic 0
≥ 2.1 mA
for logic 1
1 kilohm typical
100 Hz max.
max. 100 Hz
3 ms typical (1.4 to 5 ms)
3 ms typical (1.4 to 5 ms)
100 %
TTL/CMOS 200 m max. unshielded
NAMUR 600 m max. unshielded
5 V, 80 mA typical
24 V (20 to 30 V)
100 mA each
150 mA each at 15 V input voltage
120 mA each at 8.5 V sensor supply (NAMUR)
5.5 W
5/15/24 V DC
- 15 to 2 V
4 to 33 V
5 mA
100 m max.
Between group and ground point: 1250 V AC
20 mm x 255 mm x 195 mm
Approx. 0.45 kg
1) NAMUR = Sensor with current output to DIN 19234,
Standards Committee for Measurements and Control.
However, the module is not intrinsically safe.
2) The current consumption from L+/L- increases accordingly.
1)
2)
System Manual
C79000-B8576-C199-03