Jumper Settings; Installation And Startup - Siemens S5-155U System Manual

Hide thumbs Also See for S5-155U:

Table of Contents

Jumper settings

This section explains the installation and removal of the module in the

CC, controls and indicators on the front plate of the CPU, and the

procedure for module startup.

There are four system interrupts for interrupt-driven program

processing with the CPU 948:

• • INTA/B/C/D (depending on the CPU slot, see also Section 4.1.1)

The interrupts you wish to use must be enabled by inserting the

jumper plugs provided. The jumper socket is situated on the basic

board above the receptacle for the memory card. The exact location is

given in the following figure:

Location of Jumper Socket

All other jumpers are required for quality testing by the

manufacturer. You must not change these jumper settings.

C79000-B8576-C199-03

System Manual

Show Quick Links

Table of Contents

S5-135u Simatic s5