Incorrect Date And Time; System Will Not Boot; Error Message On Screen - Fujitsu PRIMERGY CX2550 M4 Operating Manual

Troubleshooting and tips
8.6

Incorrect date and time

Ê Set the date and time in the operating system or in the BIOS Setup under
the Main menu, using System Date and System Time respectively.
I
Note that the operating system may affect the system time. For example,
the operating system time may deviate from the system time under
Linux, and would overwrite the system time in the default setting on
shutdown.
If the date and time are still wrong after the server node has been switched off
and back on again, replace the lithium battery (for a description refer to the
"FUJITSU Server PRIMERGY CX2550 M4 / CX2560 M4 / CX2570 M4 Server
Node Upgrade and Maintenance Manual") or contact our customer service
team.
8.7

System will not boot

The system will not boot after installing a new hard disk drive.
SAS configuration incorrect
Ê Check the settings for the hard disk drives (SAS Device Configuration) and
the additional settings in the SAS configuration menu.
8.8

Error message on screen

The meaning of the error message is explained in the documentation for the
relevant components and programs on the Fujitsu manuals server.
70 Operating Manual
CX2550/60/70 M4