Fujitsu PRIMERGY CX2550 M4 Operating Manual page 52

Hardware installation
Connecting the keyboard, mouse and monitor
Ê Connect the keyboard and mouse to the USB connectors of the server node.
Ê Connect the monitor to the video connector.
I
If a separate graphics card is installed in a slot, the graphic controller
on the system board is automatically deactivated. The corresponding
video connector can not be used. Plug the video cable of the monitor
into the video connector of the graphics card.
Ê Connect the power cord of the monitor to the mains socket strip of the rack.
I
The rated current for the monitor is indicated on the technical data label
on the monitor or in the operating manual for the monitor.
52 Operating Manual
CX2550/60/70 M4