Fujitsu PRIMERGY CX2550 M4 Operating Manual page 57

Pos. Label
5 RESET
I
The server nodes are controlled via related operating panel areas on the
front side of the CX400 M4 server enclosure. See "FUJITSU Server
PRIMERGY CX400 M4 Server Enclosure Operating Manual".
iRMC-related status signals
ID indicator
blue flashing
blue flashing
I
For further information, please refer to chapter "Updating or recovering
the iRMC" in the Upgrade and Maintenance Manual.
CX2550/60/70 M4
Button Function
Reboots the system.
Press the reset button with a straightened end
of a paper clip.
Reset button
V
Global error
indicator
off
orange flashing
Operating Manual
Starting up and operation
CAUTION!
Risk of data loss!
Description
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
An emergency flash of the iRMC
firmware is in progress.
57