Internal Modules; Bluetooth 2.1; Bluetooth Low Energy (4.0); Coronis Wavecard 25/500Mw - MTX -4G-JAVA-IoT Hardware User's Manual

14. Internal Modules

MTX-Java-IoT modems can be shipped with up to two internal RF cards installed which allows for use with
almost all protocols that exist nowadays, such as Bluetooth, WiFi, ISM, ZigBee, etc.
The RF card is connected to the internal coprocessor. This means that models mounting an RF card,
there will be only one serial port (DB9, DB15 HD, RS485,...) available to be used.
RF card modules can have internal or external antennas. In the case of modules mounting external
antennas, an SMA Female connector will be available.

14.1 Bluetooth 2.1

This option allows to make connections like Bluetooth-IP and Bluetooth-RS232 (with MTX-Tunnel
software). It includes an antenna with a 300 meters reach.
Temperature range: -40ºC to 85ºC.

14.2 Bluetooth Low Energy (4.0)

This option allows to make a Bluetooth-IP connection (with MTX-Tunnel),with 128 bit encryption, sensors
or BLE peripheral in a range up to 50 meters. The antenna is built-in in the pcb itself, with a sensitivity
up to -92 dbm.
Temperature range: -40ºC to 85ºC.

14.3 Coronis Wavecard 25/500mW

This option allows to connect with sensors and equipment with Wavenis technology, such as Smart meter
and data logger for water and gas pulse meters (e.g. Waveflow), wireless binary ON/OFF monitor (e.g.
Wavelog), 0-5V or 4-20mA RF sensors (Wavesense), real time temperatura sensors (Wavetherm), ...
It has a scope range up to 1 kilometer (25mW version) and 4 kilometers (500wM version) and supports
up to 3 boosters of 500mW. It operates in free bands ISM 433, 868 or 915 MHz.
Temperature range: -20ºC to 70ºC.
MTX-Java-IoT | 2018/2
MTX © by MATRIX ELECTRONICA S.L.U.
SUPPORT: iotsupport@mtxm2m.com | SALES: info@mtxm2m.com | mtxm2m.com
79