Advertisement

Quick Links

Our company network supports you worldwide with offices in Germany, Austria,
Switzerland, Great Britain and the USA. For more information please contact:
FORTEC Elektronik AG
Hauptniederlassung
Lechwiesenstr. 9
86899 Landsberg am Lech
Telefon:
+49 (0) 8191 91172-0
Telefax:
+49 (0) 8191 21770
E-Mail:
sales@fortecag.de
Internet:
www.fortecag.de
FORTEC Elektronik AG
Büro Wien
Nuschinggasse 12
A-1230 Wien
Telefon:
+43 1 8673492-0
Telefax:
+43 1 8673492-26
E-Mail:
office@fortec.at
Internet:
www.fortec.at
The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
Manual
MTX-GTW
Matrix Electrónica, S.L.
FORTEC Elektronik AG
Büro West
Hohenstaufenring 55
50674 Köln
Telefon:
+49 (0) 221 272 273-0
Telefax:
+49 (0) 221 272 273-10
E-Mail:
west@fortecag.de
Internet:
www.fortecag.de
ALTRAC AG
(Tochter der FORTEC):
Bahnhofstraße 3
CH-5436 Würenlos
Telefon:
+41 (0) 44 7446111
Telefax:
+41 (0) 44 7446161
E-Mail:
info@altrac.ch
Internet:
www.altrac.ch

Advertisement

Table of Contents
loading

Summary of Contents for MTX MTX-GTW

  • Page 1 Manual MTX-GTW Matrix Electrónica, S.L. Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln...
  • Page 2: Hardware User Guide

    MTX-GTW MTX-GTW Hardware User Guide www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 1 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 3: General Notes

    Spanish law without reference to any other substantive law. Important information This technical description contains important information for the start up and use of the MTX-GTW modems. Read it carefully before you start working with the MTX-GTW modems. The warranty will be void should damage occur due to non-compliance with these instructions for use.
  • Page 4: Revision Information

    2014/10 AEM/TP Language style revision 2014/12 Minor revision 2015/04 Minor revision 2015/04 MTX-GTW Versions added 2015/04 Product label information HW & FW revisions added 2015/08 Conformity assessment added www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 3 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 5: Table Of Contents

    RS232 2 ........................15 5.1.1.6 CAN ........................... 15 5.1.1.7 Power Supply ......................16 Internal Interfaces ......................17 5.2.1 TQMa28 ........................17 5.2.2 Wifi ..........................17 5.2.3 Expansion Connector ....................17 www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 4 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 6 Antenna precautions ......................27 Radio Frequency (RF) exposure and SAR ................28 Personal medical devices ....................29 Conformity assessment ......................30 Standards of European Type Approval ................30 www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 5 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 7 SAR requirements specific to portable mobiles ..............41 11.3 SELV requirements ......................42 RoHS Statement ........................43 Disposal of old electrical & electronic equipment ..............43 Sales contact ......................... 44 www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 6 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 8: Description

    MTX-GTW 1. Description The MTX-GTW is designed to be driven by the TQMa28 module and offers PC core functionalities and standard interfaces. This user guide provides information about the components, features, connectors and signals available on the MTX-GTW. 1.1 Product label The label fixed to the bottom of a MTX devicel comprises the following information: No.
  • Page 9: Hardware Revisions

    WiFi antenna SMA F RP 1.3 Firmware revisions Hardware Revision Starting production date Changes 1.00 09/2014 Initial release 1.01 09/2014 Minor revision and bug fixes 2.00 06/2015 3G PPP connections problem solved www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 8 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 10: Warranty

    3. References  STK-MBa28 User Manual  TQMa28 User Manual  iMX28 Freescale Reference Manual www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 9 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 11: Technical Data

    Illustration 1: MTX-GTW block diagram 4.1.2 Technical data electronics The interfaces and system components listed in the following are implemented on the MTX-GTW. Due to the fact that the board can be installed in a casing, the interfaces are divided into external and internal interfaces.
  • Page 12: External Interfaces

    4x Status LEDs  1x DIP switch 4.1.2.4 System components  Temperature sensor  EEprom  4.1.3 Technical data mechanics, design Dimensions PCB (WxDxH): 78.1x66.8x37.2 mm Weight: < 190g www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 11 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 13: Electronics Specification

    MTX-GTW 5. Electronics Specification 5.1 External interfaces Illustration 2: MTX-GTW external interfaces 5.1.1 Function specification 5.1.1.1 USB OTG The USB OTG interface of the TQMa28 (USB0) is offered as a Mini USB AB-Type Type of media: USB OTG 2.0 Hi-Speed, 5V bus voltage (limited to 500mA)
  • Page 14: Ethernet

    MTX-GTW 5.1.1.2 Ethernet The MTX-GTW directly drives the Ethernet 1 interface. The SMSC LAN8720Ai is used as PHY. Type of media: 10/100 Mbit Signal characteristic: Compatible with the IEEE-802.3 standard Status LEDs: Modes: MDI, Auto-MDIX Interface on module: RMII/ENET0 Manufacturer...
  • Page 15: Rs232 1

    Request to Send CTS0 Clear To Send Ground 5.1.1.4 RS232 1 The AUART3 interface of the TQMA28 drives the RS232 interface of the MTX-GTW by default. The Maxim MAX3222 is used as a driver. Transfer rate: Up to 250Kbit/s Interface on module:...
  • Page 16: Rs232 2

    Transmit Data RXD2 Receive Data Ground 5.1.1.6 CAN The CAN 0 port of the TQMA28 directly drives the interface on the MTX-GTW. The NXP TJA1051T/3 is used as a CAN transceiver. Transfer rate: Up to 1Mbit/s Interface on module: CAN_0 Signal characteristic: Compatible with the ISO-11898 standard (CAN 2.0B)
  • Page 17: Power Supply

    Signal Type Remark CANH CAN High-Level I/O CANL CAN Low-Level I/O 5.1.1.7 Power Supply For protective and EMC reasons the supply input of the MTX-GTW is designed very robustly. Parameter Min. Typ. Max. Unit DC Input Voltage Power consumption <2 www.mtxm2m.com...
  • Page 18: Internal Interfaces

    MTX-GTW 5.2 Internal Interfaces 5.2.1 TQMa28 The core of the MTX-GTW is the TQ Components TQMa28 module. The following table shows the key features of this module. Feature Description Processor Freescale iMX287 @ 454MHz 128MB DDR2 FLASH 4GB eMMC EEPROM...
  • Page 19: User Interfaces

    Ethernet link speed LED indication. On with 100Mbps, OFF with 10Mbps. (Red LED) Ethernet link activity LED indication. (Green LED) Both DLp1 and DL1 are visible though the LED window placed on the top of the MTX-GTW box. 5.3.2 DIP Switch The MTX-GTW has one Dip-Switch with configuration purposes.
  • Page 20: System Components

    EEPROM – M24C46 TQMa28 0x50 5.4.3 RTC On the MTX-GTW board there is a DS1339U RTC module. The RTC is supplied by a super capacitor in order to maintain the information if the main supply is removed. I2C Bus Position...
  • Page 21: Mtx-Gtw Versions

    MTX-GTW 6. MTX-GTW Versions 6.1 MTX-GTW-3G The MTX-GTW-3G includes the Cinterion EHS5 3G modem. It also includes some features which are not available on the MTX-GTW version. 6.1.1 1-Wire A 1-Wire interface is available on the MTX-GTW-3G via the Maxim DS2482-100 I2C chip.
  • Page 22: Gpios

    MTX-GTW 6.1.3 GPIOs The MTX-GTW-3G is able to support up to 4 GPIOs (IRQ capable) but they are multiplexed with other interfaces. The following table shows the configuration of the DB15 connector and the multiplexed interfaces Signal Type Remark GPI 1...
  • Page 23: Mtx-Gtw-3G-Gps

    MTX-GTW 6.2 MTX-GTW-3G-GPS The MTX-GTW-3G includes the Cinterion PHS8 3G modem which integrates a GPS receiver. It also includes some features which are not available on the MTX-GTW version. 6.2.1 1-Wire A 1-Wire interface is available on the MTX-GTW-3G via the Maxim DS2482-100 I2C chip.
  • Page 24: Gpios

    MTX-GTW 6.2.3 GPIOs The MTX-GTW-3G is able to support up to 4 GPIOs (IRQ capable) but they are multiplexed with other interfaces. The following table shows the configuration of the DB15 connector and the multiplexed interfaces Signal Type Remark GPI 1...
  • Page 25: Mechanics Specification

    The pictures below show the mechanical design of the terminal along with the positions of the different connectors, mounting holes and dimensions. The terminal case is made of durable PC/ABS plastic. Mounting holes Micro USB 2.0 Connector RJ45 (Ethernet) Power Supply www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 24 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 26: Requirements For The Superior System

    7.2 Requirements for the superior system The MTX-GTW has an enclosure which protects itself again dust, external impact and contact. However, as the MTX-GTW PCB can be bought as a standalone product, the following points must be taken into consideration.
  • Page 27: Safety Requirements And Protective Regulations

    8.2 General precautions The MTX-GTW Terminal as a standalone item is designed for indoor use only. For outdoor use it must be integrated into a weatherproof enclosure. Do not exceed the environmental and electrical limits as spe ified i Te h i al Data .
  • Page 28: Sim Card Precautions

    MTX-GTW • The MTX-GTW Terminal must not be installed nor located in areas where the surface temperature of the plastic case could exceed 85°C. In order to provide strain relief and to avoid transmitting excessive vibration to the device during installation, all cables connected to the MTX-GTW Terminal must be secured or clamped immediately adjacent to the device's connectors.
  • Page 29: Radio Frequency (Rf) Exposure And Sar

    This is because the transceiver is designed to use the minimum power required to reach the network. The MTX-GTW wireless modem device has been approved for applications where the antenna is located more than 20cm from the body. In all other configurations the user is responsible for meeting the local SAR regulations.
  • Page 30: Personal Medical Devices

    MTX-GTW Users of the MTX-GTW wireless modem device are responsible for ensuring that they meet the SAR regulatory requirements of the countries in which they intend to operate the device and that their documentation contains the relevant SAR declaration, certification information and user guidance as appropriate.
  • Page 31: Conformity Assessment

    28019 Madrid Spain 9.1 Standards of European Type Approval We declare under our sole responsibility that the products MTX-GTW-3G containing Cellular Engine Cinterion engine EHS6 (Type L30960-N2950-A100), to which this declaration relates, are labeled with the CE conformity mark. DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC.
  • Page 32 The technical documentation relevant to the above equipment will be held at MATRIX ELECTRONICA S.L.U. Alejandro Sanchez 109 28019 Madrid Spain Madrid, 20/05/2013. Mr. J. Vicente Managing Board www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 31 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 33: Fcc Compliant

    MTX-GTW 9.2 FCC Compliant MTX-GTW-3G and any variants contain FCC ID: QIPEHS6. The FCC Equipment Authorization Certification for the EHS6 Module is listed under the FCC identifier QIPEHS6 Industry Canada Certification Number: 7830A-EHS6 granted to Gemalto M2M GmbH. The Cinterion reference application of the EHS6 Module registered under the above identifier is certified to be in accordance with the following Rules and Regulations of the Federal Communications Commission (FCC).
  • Page 34 π = 3.1416 G(dBi)=10*log10(G) Solving for G; the maximum antenna gain is Band Distance Maximum Gain in dBi 850MHz 20cm 1.7669 850MHz 50cm 9.7257 1900MHz 20cm 7.1227 1900MHz 50cm 15.0815 www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 33 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 35: Declaración De Conformidad (Spanish)

    Spain 10.1 Estándares de homologación europea Declaramos bajo nuestra responsabilidad que los productos MTX-GTW-3G que contienen un módulo celular Cinterion EHS6 (tipo L30960-N2950-A100), al cual se refiere esta declaración, están etiquetados con el marcado CE de conformidad. DIRECTIVA 2004/108/EC DEL PARLAMENTO EUROPE Y DEL CONSEJO del 15 de Diciembre de 2004 sobre la aproximación de las leyes de los Estados Miembros correspondientes a la compatibilidad...
  • Page 36 IEC/EN 60950-1:2005 / EN 60950-1:2006+A11:2009: Salud y Seguridad La documentación técnica referente al equipo anterior está disponible en: MATRIX ELECTRONICA S.L.U. Alejandro Sanchez 109 28019 Madrid España Madrid, 20/05/2013. Sr. J. Vicente Managing Board www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 35 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 37: Conformidad Fcc

    MTX-GTW 10.2 Conformidad FCC MTX-GTW-3G y todas sus variantes contienen el FCC ID: QIPEHS6. El Certificado de Autorización de Equipo de la FCC para el módulo EHS6 está listado con el identificador FCC QIPEHS6 Número de Certificación de Industria en Canadá: 7830A-EHS6 asignado a Gemalto M2M GmbH.
  • Page 38 π = 3.1416 G(dBi)=10*log10(G) Despejando G; la máxima ganancia de antena es: Banda Distancia Ganancia Máxima en dBi 850MHz 20cm 1.7669 850MHz 50cm 9.7257 1900MHz 20cm 7.1227 1900MHz 50cm 15.0815 www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 37 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 39: Regulatory And Type Approval Information

    11. Regulatory and type approval information 11.1 Directives and standards The MTX-GTW-3G modem has been designed to comply with the directives and standards listed below. It is the responsibility of the application manufacturer to ensure compliance of the final product with all provisions of the applicable directives and standards, as well as with the technical specifications provided in this document.
  • Page 40 Please see next table for an overview of toxic or hazardous substances or elements that might be contained in product parts in concentrations above the limits defined by SJ/T 11363-2006. www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 39 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 41 MTX-GTW www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 40 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 42: Sar Requirements Specific To Portable Mobiles

    I this o te t, the te fi ed lo atio ea s that the device is physically secured at one location and cannot be easily moved to another location. www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 41 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 43: Selv Requirements

    MTX-GTW 11.3 SELV requirements The power supply connected to the MTX-3G-JAVA modem shall be in compliance with the SELV requirements defined in EN 60950-1. www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 42 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 44: Rohs Statement

    MTX-GTW 12. RoHS Statement The MTX-GTW modem is compliant with the 2002/95/EC Directive of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
  • Page 45: Sales Contact

    Fax: 902 99 54 14 (PORTUGAL) Phone 1: 902 19 81 46 Phone 1: +351218162625 Phone 1: +56(9)53369943 Fax 1: 902 99 54 14 Fax 1: +351218149482 Phone 2: +56(9)74822647 www.mtxm2m.com www.matrix.es 2015/08 v1.6 Page 44 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
  • Page 46 Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln Telefon: +49 (0) 8191 91172-0 Telefon:...

Table of Contents