Main Features And Services; Key Features At A Glance - MTX -4G-JAVA-IoT Hardware User's Manual

7. Main Features and Services

The MTX-Java-IoT performs a set of telecom services (TS) according to GSM standard phase 2+, ETSI and
ITU-T. The services and functions of the MTX-3G-Java are implemented by issuing customized applications
embedded on the device, by AT commands issued internally or over the USB, RS232 or RS485 interface.

7.1 Key features at a glance

The MTX-3G-Java is a UMTS/HSPA and also GSM/GPRS/EDGE bands mobile station with the
characteristics shown in the table below.
FEATURE
General
Frequency bands
GSM class
Output power
Power supply
Physical
RoHS
MTX-Java-IoT | 2018/2
MTX © by MATRIX ELECTRONICA S.L.U.
SUPPORT: iotsupport@mtxm2m.com | SALES: info@mtxm2m.com |
IMPLEMENTATION
UMTS/HSPA+: Five band, 800/850/900/1900/2100MHz
GSM/GPRS/EDGE: Quad band, 850/900/1800/1900MHz
Small MS
Class 4 (+33dBm ±2dB) for EGSM850
Class 4 (+33dBm ±2dB) for EGSM900
Class 1 (+30dBm ±2dB) for GSM1800
Class 1 (+30dBm ±2dB) for GSM1900
Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK
Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK
Class E2 (+27dBm +3dB/-4dB) for GSM 1800 8-PSK
Class E2 (+27dBm +3/-4dB) for GSM 1900 8-PSK
Class E2 (+26dBm +3/-4dB) for GSM 1800 8-PSK
Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI
Class 3 (+24dBm +1/-3dB) for UMTS 1900, WCDMA FDD BdII
Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII
Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV
Class 3 (+24dBm +1/-3dB) for UMTS 800, WCDMA FDD BdVI
Single supply voltage
Maximum: 6.5 to 40V (without damaging the device)*
Recommended: 7 to 35V
*(Not guaranteed over the whole temperature range / Supplies from
35 to 40V may damage the device during an extended use)
Dimensions: 78,1 x 66,8 x 37,2 mm Weight: approx. 190g
All hardware components are fully compliant with the EU RoHS
Directive
mtxm2m.com
15