Internal Modules - MTX -3G-JAVA-IoT User Manual

4.15

Internal modules

MTX-IoT modems can be shipped with up to two internal RF cards installed which allows for use with
almost all protocols that exist nowadays, such as Bluetooth, WiFi, ISM, ZigBee, etc.
The RF card is connected to the internal coprocessor. This means that models mounting an RF card,
there will be only one serial port (DB9, DB15 HD, RS485,...) available to be used.
RF card modules can have internal or external antennas. In the case of modules mounting external
antennas, an SMA Female connector will be available.
4.15.1 Bluetooth 2.1
T.B.D.
4.15.2 Bluetooth Low Energy (4.0)
T.B.D.
4.15.3 Coronis Wavecard 25/500mW
T.B.D.
4.15.4 ISM (868/900MHz)
T.B.D.
4.15.5 LORA
T.B.D.
4.15.6 Sigfox
T.B.D.
4.15.7 WMBUS
T.B.D.
4.15.8 3-axis accelerometer
T.B.D.
www.mtxm2m.com 2017/07 v1.2
MTX M2M® by MATRIX ELECTRONICA S.L.U
MTX-xG-JAVA-IoT Family
/
Page 73 105