1. With an impedance of ZLOAD=50Ohm at the antenna port.
2. Measurements
Average times: SLEEP and ULP mode – 3 minutes, transfer modes – 1.5 minutes.
Communication tester settings: no neighbor cells, no cell reselection etc., RMC (reference
measurement channel).
DESCRIPTION
ULP mode supply current
7.4 RF antenna interface description
The table below briefly summarizes the RF Antenna interface GSM/UMTS (dBm).
PARAMETER
UMTS/HSPA Connectivity
Receiver Input Sensitivity @ ARP
RF Power @ ARP with 50Ohm Load
GPRS Coding Schemes
EGPRS
MTX-Java-IoT | 2018/2
MTX © by MATRIX ELECTRONICA S.L.U.
SUPPORT: iotsupport@mtxm2m.com | SALES: info@mtxm2m.com |
start
6
minutes
CONDITIONS
TA = 25ºC
TA = 85ºC
CONDITIONS
Band I, II, V, VI, VIII
UMTS 800/850 Band VI/V
UMTS 900 Band VIII
UMTS 1900 Band II
UMTS 2100 Band I
UMTS 800/850 Band VI/V
UMTS 900 Band VIII
UMTS 1800 Band III
UMTS 2100 Band I
Class 12, CS1 to CS4
Class 12, MCS1 to MCS9
after
switching
MIN
-104.7/-106.7
-103.7
-104.7
-106.7
21 (max 25)
21 (max 25)
21 (max 25)
21 (max 25)
mtxm2m.com
ON
the
modules.
TYP
MAX
25µA
35µA
70µA
85µA
TYP
-110
-110
-109
-110
24
24
24
24
25