Restore Factory Settings - HomeMatic HmIP-MIOB Installation Instructions And Operating Manual

1x long red
lighting
6x long red
flashing
1x orange and
1 x green
lighting
8

Restore factory settings

The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the Multi IO Box, please
proceed as follows:
Press and hold down the system button (A) for 4
•
seconds until the LED quickly starts flashing orange
(see fig. 4).
• Release the system button again.
• Press and hold down the system button again for
Transmission
failed or duty
cycle limit is
reached
Device defective
Test display
Restore factory settings
Please try again
(see sec. „7.1
Command not
confirmed" on
page 60 or „7.2
Duty cycle" on
page 61).
Please see your
app for error mes-
sage or contact
your retailer.
Once the test dis-
play has stopped,
you can continue.
63