HomeMatic HmIP-MIOB Installation Instructions And Operating Manual page 44

Function and device overview
room temperature using the floor heating.
Thanks to the input for a humidity and temperature
limiter, mould formation caused by condensation water
on the cables or overheating of the heating system can
be reliably avoided.
You can flexibly mount the device using the supplied
screws or the Homematic IP DIN-Rail Adapter HmIP-DRA
(available as an option).
Device overview (see figure 1):
(A)
system button (teach-in/pairing button and LED)
(B)
cover
(C) connecting terminals for PE (protective conductor)
(D)
connecting terminal for L (phase conductor)
(E)
connecting cable for N (neutral conductor)
(F) connecting terminal 4 (e.g. for connecting a
boiler)
(G)
connecting terminal 5 (changeable terminal e.g.
for connecting circulating pumps)
(H)
LEDs for connection display
(I)
connecting terminal IN1/IN2 (heating, cooling or
eco operation, temperature or humidity limiter)
(J) connecting terminals for AOUT (0 - 10 V output,
e.g. for ventilation control, function available in
connection with a Homematic Central Control
Unit CCU2)
44