Teaching-In To The Homematic Ip Access Point - HomeMatic HmIP-MIOB Installation Instructions And Operating Manual

6.4.2

Teaching-in to the Homematic IP Access Point

First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the
operating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to
the Homematic IP User Guide, available for
download in the download area of www.eQ-3.de.
To teach-in the Multi IO Box to the Access Point, please
proceed as follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item "Teach-in device".
• Briefly press the system button (A) until the LED
quickly starts flashing orange (see fig. 6). The
teach-in mode of the selected channel remains
activated for 3 minutes.
You can manually start the teach-in mode for
another 3 minutes by pressing the system button
(A) briefly (see figure 6).
• Your device will automatically appear in the
Homematic IP app.
Start-up
59