Page 2
Reorder P/N: PULSE-PT01-INST Rev B (PULSE Display Kit – Pull Type) NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information...
This is an optional suction cup mount that may be useful when mounting the PULSE display. This mount is not supplied with this kit, but can be ordered as per the following information: To order from NORAC: • Contact us at any of the numbers above. • Part number - 106332 To order from RAM: •...
2 Technical Specifications CAN ICES-3(A)/NMB-3(A) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
2. RAM manufactures a suction cup mount that works well for installing the PULSE display. The suction cup mount is not supplied with this kit, but is available from NORAC or RAM. See Section 1.2 for ordering information.
Page 7
Figure 1: PULSE Pull Type Display Kit Parts...
Need help?
Do you have a question about the U5 and is the answer not in the manual?
Questions and answers