Section 5.2 Rear Panel Area - Panasonic AV-HLC100E Operating Instructions Manual

1. Power switch
Press the [  ] button to turn on the power and start up
the unit. To turn off the power, press the [
again.
2. Power input socket
Connect the supplied AC adaptor.
3. USB connectors
Connect a keyboard and mouse.
4. LAN connectors (RJ-45)
Connect with a local network using a LAN cable.
5. HDMI/DP connectors
Connect with an external computer monitor using an
HDMI cable or DisplayPort cable.
6. [LINE OUT] connector
This outputs audio.
7. [MIC] connector
This inputs audio.

Section 5.2 Rear panel area

8.
 ] button
9.
10. SDI VIDEO OUT connectors
11. Analog AUDIO IN connectors
12. Analog AUDIO OUT connectors
23
[TALLY] connector
Connect an external tally light or similar device.
• External tally output occurs only when switched
to VIDEO IN 1 to 4. Output does not occur for a
camera connected via the network. For details,
refer to the operating instructions.
VIDEO IN connectors
These input video signals (HDMI or SDI) from an
external device.
These output SDI video signals to an external device.
These input analog audio signals from an external
device (audio mixer, etc.).
These output analog audio signals to an external
device.