Switcher Area - Panasonic AV-HLC100E Operating Instructions Manual

1. Program bus selection buttons
[PGM 1 to 8/CLIPS/STILLS]
These select the video source (background) for
program output. The button of the selected video
signal lights in red.
2. Preview bus selection buttons
[PVW 1 to 8/CLIPS/STILLS]
These select the video source for preview output.
The button of the selected video signal lights in
green.
3. [INPUT SETUP] button
This sets the video source to input.
• When the [INPUT SETUP] button is pressed, a
list of the video sources appears on the LED
display in the menu control area. Select the
video source to input with the menu selection
buttons.
4. [SELECT TRANS] button
This selects the transition of the video layer.
• When the [SELECT TRANS] button is pressed,
the preset numbers of the transitions appear on
the LED display in the menu control area.
Select the preset to use with the menu selection
buttons.
5. [CUT] button
This executes a straight cut for all selected video
layers (title, picture-in-picture, and video source).

5.1.2 Switcher area

6. [AUTO] button
This executes the transition assigned to the
selected video layer.
• Pressing the [AUTO] button during transition
execution allows you to stop operation. Press it
once again to complete the operation.
7. Fader lever
This controls the selected video layer.
8. [FTB] button
This fades the program output to a black screen.
9. [TITLE] button
Press this to control the display of the title page.
10. [PIP] button
Press this to control the display of the picture-in-
picture (PIP).
11. [BKGD] button
Press this to control the display of the video
source.
20