Section 9.2 Ptz Tab - Panasonic AV-HLC100E Operating Instructions Manual

FIGURE 47
There is an added benefit to the NDI camera connection method. When an NDI source is identified as
one that offers a webpage for settings, as cameras often do, a Configure button is added beside the
Source menu (Figure 47). Clicking this button will open the device webpage in AV-HLC100's web browser,
allowing you to configure any advanced settings that may be provided.
Note: To receive NDI|HX sources, such as the output from NDI-enabled Panasonic cameras, the
NewTek NDI|HX driver for Windows
Any of AV-HLC100's eight Switcher inputs can be
configured as a PTZ camera as just discussed.
Once a control connection is established for a PTZ
camera, the camera can be controlled directly from the
Live Desktop or the Control Surface (see Chapter 15).
In the Live Desktop, PTZ camera controls are hosted
in a special tab that is added to the Input Configuration
panel when the camera control is
In addition to pan, tilt and zoom control, you can also
manage the camera's White Balance settings, Focus
and Iris (or 'brightness'), settings for supported
cameras.
AV-HLC100 also provides a convenient, visual PTZ
preset system allowing you to 'lock in' your shots and
access them quickly.
®
must be installed on AV-HLC100.

Section 9.2 PTZ Tab

FIGURE 48
53