Section 15.2 Camera Controls; Section 15.3 Switcher Group; Program And Preview - Panasonic AV-HLC100E Operating Instructions Manual

This control group falls conveniently under your left hand, making it easy to find for
quick adjustments.
Hint: Operations in this group are directed to the same camera that the Joystick is
currently controlling.
The dominant control in the group is a Zoom rocker that you can comfortably operate using
index middle fingers to zoom network-connected and configured cameras in and out.
The Iris and Focus knobs fall conveniently under middle finger and thumb, respectively.
Rotate these knobs to adjust the names camera setting, or press them to toggle Auto
Iris and Auto Focus options (nearby red LEDs indicate when these are active).
FIGURE 96
FIGURE 97
This all important control group is dominated by red and green button rows labeled to identify the Switcher
inputs that can be selected as Program and Preview row sources.
AUX Video Output
The Preview row can also be used to determine what video source is sent to the AUX video bus (carried
by the SDI 2 and the AUX NDI outputs). As noted in Section 8.3.2, AUX output can be set to default to
either Program or (clean)Preview, but can also be assigned in the Live Desktop to show a selected
Switcher source (see Section 10.1.1).
Similarly, if you hold down the control surface ALT button before pressing a Preview row button, the
corresponding Switcher source is sent to the AUX outputs. Subsequently, the AUX source button in the
Preview row lights when ALT is pressed. To revert to the default AUX source, hold down ALT and press
the button that is lit on the Preview row.

Section 15.2 Camera Controls

Section 15.3 Switcher Group

15.3.1 Program and Preview

94