Clip Player; Section 13.8 Advanced Configuration; Audio Delay - Panasonic AV-HLC100E Operating Instructions Manual

 The Solo feature is normally operates as what it often called 'exclusive Solo' (or 'X-Or' type). This
means that enabling Solo for a given source disables all other Solo buttons.
 It is possible to use what is called 'Solo latching', ganging multiple sources for Solo output. Hold
down the Ctrl key and click additional Solo buttons to add or remove their respective audio
contributions from the latched Solo group.
Auditioning an Audio Source
It can be very useful to be able to preview one or more audio sources, doing so without allowing the test
sound to be audible on Program output. Typically, this need arises in connection with testing microphones
or other audio sources that will be used in the production.
To audition an audio source in this manner:
1. First Mute the source, removing it from primary outputs. (This step may not be required if you are
using the audio Follow option.)
2. Then enable Solo to hear it on the Headphones output.
Video and audio-only files in the CLIP player playlist may contain audio. At most, the CLIP player outputs
the first four audio channels – additional embedded channels are ignored. Other options and controls in
these sub-panels are similar to those provided for external audio sources.
The controls for all inputs (including internal audio sources) as
well as the Effects, Stream, Aux and Master output groups
include a configuration button shown when you move the
mouse over the input label.
The familiar 'gear' icon opens the Audio Configuration panel.
We touched on this panel earlier when we discussed selecting
and configuring Connections for external audio inputs. The
Audio Configuration panel offers additional features and
controls, however. Let's explore these now.
Audio and video arriving at inputs in sync will maintain sync
throughout the system to output or recording. However, you
should note that upstream issues can cause video to arrive
later than the corresponding sound.
To mitigate this sort of external problem, AV-HLC100 provides
an adjustable Audio Delay setting.

13.7.3 CLIP Player

Section 13.8 Advanced Configuration

13.8.1 Audio Delay

FIGURE 79
76