Confirming The Status Of Drawers - Toshiba e-Studio2000AC Software Troubleshooting Manual

1.CONFIRMING JOB STATUS ON THE TOUCH PANEL
When you finish the confirmation, press [Close] so that the menu returns to the one in step 2, and then press
[Close]. The menu returns to the one shown before you pressed [Job Status].
 For details on the job history displayed on the log screen, refer to the TopAccess Guide.
 For details on the error codes displayed in [Status], see the following section:
 P.62 "Error Codes"
 You can export the job history to USB. For more details, refer to the MFP Management Guide.
 Confirming the status of drawers
You can confirm the size and type-setting of the paper or the amount remaining in the drawers. During printing you
can confirm which drawer is feeding paper.
1 Press [Job Status] > the [Supply] tab.
During printing, the button for the drawer from which the paper is fed is highlighted.
Press [Close] when you finish the confirmation. The menu returns to the one shown before you pressed [Job
Status].
When [Job Status] blinks
When the paper in the drawer has run out during printing, [Job Status] on the touch panel blinks. In this case, press
[Job Status] so that the menu for displaying the printing status will appear and the button for the drawer whose paper
has run out will blink on this menu. Printing resumes when you add paper to this drawer.
14 Confirming Job Statuses of Printing/Copying/Scanning/Faxing