Basic Operations; Watch Face Items; Navigating Between Modes; Mode Overview - Casio Oceanus OCW-G2000S-1A Operation Manual

Table of Contents

Advertisement

Basic Operations

This section provides an overview of the watch
and its operations.
Note
The illustrations included in this
operation guide have been created
to facilitate explanation. An
illustration may differ somewhat
from the item it represents.

Watch Face Items

A Day of week
In the Timekeeping Mode, the day of the week
hand indicates the day of the week in the
current Home City.
B Airplane Mode mark
While the watch is in the Airplane Mode, the
day of the week hand points to h.
C Summer time setting
The day of the week hand points to the
summer time setting for the current Home City.
D Signal receive status, location information
availability
When checking the last receive result :
The day of the week hand indicates the
information that was received or acquired for
the last time adjustment.
"P": GPS signal time or phone time information
and location information
"N": GPS signal time information or time
calibration signal
When setting the Home City or World Time
City :
The day of the week hand indicates whether
or not location information is available for the
Home City or World Time City.
"P": Location information available
"N": Location information not available
Operation Guide 5501
E Last signal receive result
The second hand points to the letter that
indicates the result of the last time adjustment
operation by receipt of a signal or connection
with a phone.
"Y(YES)": Last time adjustment operation
successful.
"N(NO)": Last time adjustment operation
failed.
F RC mark
The second hand points to this mark while
calibration signal reception is in progress.
G T+P mark
The second hand points to this mark while
GPS (location information) signal reception is
in progress.
H T (Time) mark
The second hand points to this mark while
GPS (time information) signal reception is in
progress.
I C mark
The second hand points to this mark while
there is a connection between the watch and
a phone.

Navigating Between Modes

Your watch has the modes shown below.
(Approximately
Use the (C) button to navigate between
modes.
To connect with a phone, hold down (C) for
about 2.5 seconds.
Timekeeping Mode
C
Stopwatch Mode
C
C
2.5 seconds)
Bluetooth connection

Mode Overview

Timekeeping Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands indicate the
current World Time.
Current location time /
World Time swapping
(Hold down about
3 seconds.)
③ ④ ⑤ ⑥ ⑦
A Current location time (24-hour time)
One revolution every 24 hours.
B Current day of the week
C World Time hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
D World Time hour
E World Time minute
F Current location date
G World Time City
Stopwatch Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
① ②
③ ④ ⑤
A Current location time (24-hour time)
One revolution every 24 hours.
B Stopwatch seconds
C Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
D Stopwatch hours
E Stopwatch minutes
Start/
Stop
Reset
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Oceanus ocw-g2000c-1a

Table of Contents