Changing The World Time Setting In 15-Minute Steps; Swapping Your Home City Time And World Time; Stopwatch; Measuring Elapsed Time - Casio Oceanus OCW-G2000S-1A Operation Manual

Changing the World Time
Setting in 15-minute Steps
If the city you want is not available on the
watch, you can use the procedure below to
configure World Time settings.
1.
Pull out the crown to the first click.
The second hand will point to the time
zone of the current World Time City.
World Time City
Time zone
2.
Hold down (C) for about one second.
The disk will show l.
3.
Rotate the crown to change the time and
day settings.
The World Time setting change in 15-
minute increments.
4.
Push the crown back in.
Note
Changing the World Time setting
●
with this operation will cause World
Time city location information to be
deleted from the watch.
This operation cannot be performed
●
while UTC is selected as the World
Time City.
Operation Guide 5501
Swapping Your Home City
Time and World Time
Holding down (A) for about three seconds will
swap your Home City time with your World
Time.
The second hand will point to the time zone
●
of the current World Time City for a few
seconds after you swap times.
Before swapping
Home Time
Crown
World Time
If a swapping operation causes a change in
●
the day indicator setting, the day of the week
hand will rotate repeatedly.
Hand and Day Indicator Movement
l
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
see "Moving to Another Time
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Getting ready
Enter the Stopwatch Mode.
Navigating Between Modes
l
After swapping
World Time

Measuring Elapsed Time

Home Time
1.
Use the operations below to measure
elapsed time.
Zone".
2.
Press (B) to reset the elapsed time to all
zeros.
3.
Press (C) to return to the Timekeeping
Mode.

Stopwatch

Hour (24-hour time)
Seconds
Minutes Hours
A
Start
A
Stop
A
Resume
A
Stop
14