Basic Operations; Watch Face Items; Navigating Between Modes - Casio 5502 Operation Manual

Basic Operations

This section provides an overview of the watch
and its operations.
Note
The illustrations included in this
●
operation guide have been created
to facilitate explanation. An
illustration may differ somewhat
from the item it represents.

Watch Face Items

①
②
③
⑥
⑦
A Airplane Mode mark
While the watch is in the Airplane Mode, the
mode hand points to h.
B Latitude
Shows the approximate latitude of your Home
City or World Time City.
C Battery level
The current charge level is temporarily
indicated by the mode hand after you enter the
Timekeeping Mode.
D Summer time setting
The mode hand points to the summer time
setting for the currently selected Home City.
Operation Guide 5502
E Signal receive status, location information
availability
When checking the last receive result :
The mode hand indicates the information that
was received or acquired for the last time
adjustment.
"P": GPS signal time or phone time information
and location information
"N": GPS signal time information or time
calibration signal
When setting the Home City or World Time
City :
The mode hand indicates whether or not
location information is available for the Home
City or World Time City.
"P": Location information available
"N": Location information not available
④
F Alarm settings
In the Alarm Mode, the second hand indicates
⑤
if the alarm is enabled or disabled.
"ON": Alarm enabled
"OFF": Alarm disabled
⑧
G RC mark
The second hand points to this mark while
calibration signal reception is in progress.
⑨
⑩
H Last signal receive result
⑪
The second hand points to the letter that
indicates the result of the last time adjustment
operation by receipt of a signal or connection
with a phone.
"Y(YES)": Last time adjustment operation
successful.
"N(NO)": Last time adjustment operation
failed.
I C mark
The second hand points to this mark while
there is a connection between the watch and
a phone.
J T (Time) mark
The second hand points to this mark while
GPS (time information) signal reception is in
progress.
K T+P mark
The second hand points to this mark while
GPS (location information) signal reception is
in progress.

Navigating Between Modes

Your watch has the modes shown below.
Timekeeping Mode
30
C
Alarm Mode Stopwatch Mode
Timer Mode
C
C C
(Approximately
2.5 seconds)
Bluetooth connection
Use the (C) button to navigate between
modes.
Hold down (C) for at least one second to return
to the Timekeeping Mode.
To connect with a phone, hold down (C) for
about 2.5 seconds.
C
C
2