Table of Contents
Advertisement
Note
Changing the World Time setting
●
with this operation will cause World
Time city location information to be
deleted from the watch.
This operation cannot be performed
●
while UTC is selected as the World
Time City.
Swapping Your Home City
Time and World Time
Holding (B) for about three seconds will swap
your Home City time with your World Time.
Pressing (B) will cause illumination to turn
●
on. Keep the button depressed for three
seconds.
Before swapping
After swapping
Home Time
30
World Time
If a swapping operation causes a change in
●
the day indicator setting, the mode hand will
rotate repeatedly.
Hand and Day Indicator Movement
l
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
see
"Moving to Another Time
Selecting UTC (Universal
Coordinated Time) as Your
World Time City
Hold down (A) for about one second to change
the World Time setting to UTC (Universal
Coordinated Time). The small hour and
minute hands (24-hour) will indicate the
current UTC (Universal Coordinated Time).
Small Hour Hand (24-hour)
30
Small hour hand Small minute hand
Operation Guide 5502
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Getting ready
Enter the Stopwatch Mode.
Navigating Between Modes
l
Measuring Elapsed Time
World Time
30
1.
Use the operations below to measure
Home Time
elapsed time.
2.
Press (D) to reset the elapsed time to all
zeroes.
Zone".
3.
Press (C) three times to return to the
Timekeeping Mode.
Stopwatch
30
Hour (24-hour time)
Seconds
30
Minutes
Hours
B
Start
B
Stop
B
Resume
B
Stop
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted in the cases described
●
below.
When battery power is low
ー
When watch is at Level 2 power saving
ー
Power Saving
l
Getting ready
Enter the Timer Mode.
Navigating Between Modes
l
30
Setting the Timer Start Time
1.
Pull out the crown to the first click.
2.
Rotate the crown to change the
countdown start time setting.
The countdown start time can be set in
●
1-minute units up to 24 hours.
Hour (24-hour time)
Seconds
30
Hours
Minutes
3.
Push the crown back in.
Note
When the small hour hand and small
●
minute hand are at 12 o'clock, a
countdown start time of 24 hours is
specified.
Crown
17
Advertisement
Table of Contents
