Table of Contents
Advertisement
Configuring the Summer
Time Setting (World Time)
If you are in an area that observes summer
time, you can also configure a summer time
setting.
Note
The initial factory default summer time
●
setting for all cities is [AT (AUTO)]. In
many cases, the [AT (AUTO)] setting
lets you use the watch without
switching between summer time and
standard time.
When performing a manual operation
●
to select a time zone for which there is
no city name displayed, use [STD] or
[DST] for the summer time setting.
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Pull out the crown to the first click.
The second hand will point to the currently
selected World Time City (time zone).
The mode hand will move to the
●
summer time setting of the currently
selected World Time City (time zone).
3.
Hold down (A) for at least one second.
Each time you hold down (A) for at least
one second, the summer time setting will
cycle to the next available option.
[AT (AUTO)]
●
The watch switches between standard
time and summer time automatically.
[STD]
●
The watch always indicates standard
time.
[DST]
●
The watch always indicates summer
time.
30
4.
Push the crown back in to its normal
position.
Watch Operation Guide 5652
Swapping Your Home City
Time and World Time
In the Timekeeping Mode, you can swap your
Home City time with your World Time by
holding down (A) for at least three seconds.
Before swapping
Home Time
World Time
If a swapping operation causes a change in
●
the day indicator setting, the mode hand will
rotate repeatedly.
Hand and Day Indicator Movement
l
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
After swapping
World Time
30
30
Home Time
Stopwatch
Measuring Elapsed Time
Hours (24-hour time)
Seconds
30
Minutes
Hours
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Start
Stop
Resume
Stop
3.
Press (B) to reset the elapsed time to all
zeros.
4.
Press (C) to return to the Timekeeping
Mode.
Adjusting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
The watch performs alignment of the hour
●
hand, minute hand, second hand, and 24-
hour hand automatically.
13
Advertisement
Table of Contents
