World Time; Checking World Time; World Time City Setting; Swapping Your Home City Time And World Time - Casio 3461 User's Operation Manual

World Time

World Time lets you look up the current time
in any one of 39 cities around the globe, and
UTC (Universal Coordinated Time).
Getting Ready
Enter the World Time Mode.
Navigating Between Modes
l

Checking World Time

Entering the World Time Mode causes the
World Time number and city name to appear
first. After that, the display will appear as
shown below.
World Time number
World Time
Home City time
Pressing (A) displays the city for the
●
displayed time.
To change the selected World Time city,
●
press (D).
Operation Guide 3459/3461

World Time City Setting

You can specify up to five cities as your World
Time favorites. If you are in an area that
observes summer time, you can also enable
or disable summer time.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1.
Use (D) to display the World Time number
whose setting you want to configure.
2.
Hold down (A) for about two seconds.
This causes [WT] to flash on the display.
3.
Use (D) and (B) to display the city you want
to assign to the World Time number.
4.
If you want to change the summer time
setting, press (C).
5.
Use (D) to select a summer time setting.
Each press of (D) cycles through available
settings in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
6.
Press (A) to exit the setting screen.
Note
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
Swapping Your Home City
Time and World Time
Press (A) and (B) at the same time to swap
your Home City time and World City time.
Before swapping After swapping
World Time
Home Time World Time
Note
This function comes in handy when
●
you need to move to another time
zone. For details about how to use it,
go to the section below.
Moving to Another Time Zone
l
Alarms and Hourly Time
Signal
The watch will beep when the alarm time is
reached. You can configure up to four
standard daily alarms, and one daily alarm
with snooze. The hourly time signal causes the
watch to beep every hour on the hour.
Snooze causes the alarm to sound up to
●
seven times, at five-minute intervals.
The alarm sound is muted in the cases
●
described below.
When battery power is low
ー
When watch is at Level 2 power saving
ー
Power Saving Function
l
Getting ready
Enter the Alarm Mode.
Navigating Between Modes
l
Home Time
12