Table of Contents
Advertisement
Copyrights and Registered
Copyrights
Bluetooth
®
is a registered trademark of
●
Bluetooth SIG, Inc.
iPhone and App Store are registered
●
trademarks of Apple Inc. in the United
States and other countries.
iOS is a trademark or registered trademark
●
of Cisco Systems, Inc.
GALAXY, GALAXY Note, and GALAXY S
●
are registered trademarks of Samsung
Electronics Co., Ltd.
Android and Google Play
TM
are registered
●
trademarks of Google Inc.
Other company names and product names
●
used herein are trademarks or registered
trademarks of their respective companies.
Troubleshooting
Signal Reception (GPS)
Q1
The watch cannot perform a receive
operation.
Is the watch's battery charged?
Signal reception is not possible while
battery power is low. Keep the watch
exposed to light until it recharges
sufficiently.
Solar Charging
l
Is the watch in the Timekeeping Mode?
Signal reception is not possible unless the
watch is in the Stopwatch Mode. Note that
signal reception is also disabled in the
Airplane Mode. Return to the
Timekeeping Mode and/or exit the
Airplane Mode.
Navigating Between Modes
l
After checking the above, the watch still
cannot perform a receive operation.
GPS signal reception is not possible
under the conditions described below.
During power saving
●
While the crown is pulled out
●
Timer countdown operation in progress
●
Operation Guide 5502
Q2
The second hand remains at "T+P" or
"T(TIME)" during the signal receive
operation.
The watch may be receiving leap second
information.
Leap Second Reception
l
Q3
The signal receive operation always
fails.
Is the watch in a location that is appropriate
for signal reception?
Check your surroundings and move the
watch to a location where signal reception
is better.
Appropriate Signal Reception Location
l
Is the face of the watch pointed straight
upwards at the sky?
Minimize movement of the watch while the
receive operation is in progress.
When the watch is set up for auto receive,
take care to avoid covering the watch face
with the sleeve of your clothing.
An alarm started sounding while the
receive operation was in progress.
Receive stops if an alarm operation starts
while it is being performed. Disable the
alarm.
Enabling/Disabling the Alarm
l
Q4
Signal reception should have been
successful, but the watch's time and/
or day is wrong.
Is your Home City setting correct for your
location?
Change your Home City setting so it
correctly reflects your location.
Acquiring GPS Location Information
l
Manually
Setting a Home Time City
l
Is the hand and/or day indicator alignment
correct?
Adjust hand and/or day indicator
alignment.
Adjusting Hand and Day Indicator
l
Alignment
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.
Signal Reception (Time
Calibration Signal)
Q1
The watch cannot perform a receive
operation.
Is the watch's battery charged?
Signal reception is not possible while
battery power is low. Keep the watch
exposed to light until it recharges
sufficiently.
Solar Charging
l
Is the watch in the Timekeeping Mode?
Signal reception is not possible unless the
watch is in the Stopwatch Mode. Note that
signal reception is also disabled in the
Airplane Mode. Return to the
Timekeeping Mode and/or exit the
Airplane Mode.
Navigating Between Modes
l
Is your Home City setting correct for your
location?
The watch will not indicate the correct time
if the Home City setting is wrong. Change
your Home City setting so it correctly
reflects your location.
Acquiring GPS Location Information
l
Manually
Setting a Home Time City
l
After checking the above, the watch still
cannot perform a receive operation.
Time calibration signal reception is not
possible under the conditions described
below.
When watch is at Level 2 power saving
●
When the crown is pulled out
●
Timer countdown operation in progress
●
If successful reception is not possible for
some reason, you can adjust the time and
day settings manually.
22
Advertisement
Table of Contents
