Advanced Options; Table 11 Advanced Options; Figure 8 Advanced Options - Honeywell XYR 6000 User Manual

Advanced Options

Advanced options are non-typical configuration commands.
Item
Key Server Communication
Method
Read Tracelog Flag
Write Tracelog Flag
Select Infrared Communication
Port
Read TX Power Level
Revision 9
July 2011

Figure 8 Advanced Options

Table 11 Advanced Options

Description
Determines how the PDA will receive security keys from the PC's Key Server
Manager application. From the Comm Method menu select one of the
following methods.
ActiveSync – Select this to receive keys over a USB connection, such as
while the PDA battery is being charged in its base.
Infrared – Select this to receive keys over the infrared port.
Important: The Comm Method settings match in the PC's Key Server
Manager and in the Authentication Device (both must be set to Infrared or both
to ActiveSync) in order for your PDA to receive security keys.
Not available for transmitters. Used with multinodes. Reads conditional
tracelog flag value. Tracelog flags are used to enable and disable logging
functionality used for field support.
Not available for transmitters. Used with multinodes. Writes conditional
tracelog flag value. Tracelog flags are used to enable and disable logging
functionality used for field support .
Overrides the detected infrared communication port detected on your PDA. If
infrared communication is not functioning, you can override the detected
settings using this option.
Reads the transmission power level of the transmitter radio.
OneWireless XYR 6000 HLAI Transmitter R120 User's Manual
5. Operation
5.6. Authentication device menus
29