Advanced Options; Table 9 Advanced Options; Figure 8 Advanced Options - Honeywell XYR 6000 User Manual

Advanced Options

Advanced options are non-typical configuration commands.
Item
Restart To Defaults
Restart
Read TX Power Level
Read Tracelog Flag
Write Tracelog Flag
Select Infrared Communication
Port
Revision 2
8/7/07

Figure 8 Advanced Options

Table 9 Advanced Options

Description
Commands the transmitter to restart to factory default configuration. Network
and security configurations will be cleared.
Commands the transmitter to restart with the current configuration.
Reads the transmission power level of the transmitter radio.
Not available for transmitters. Used with multinodes. Reads conditional
tracelog flag value. Tracelog flags are used to enable and disable logging
functionality used for field support by development engineering.
Not available for transmitters. Used with multinodes. Writes conditional
tracelog flag value. Tracelog flags are used to enable and disable logging
functionality used for field support by development engineering.
Overrides the detected infrared communication port detected on your PDA. If
infrared communication is not functioning, you can override the detected
settings using this option.
OneWireless XYR 6000 Temperature Transmitter User's Manual
5. Operation
5.5. Authentication device menus
23