How To Use Flow Measurement - A&D GX-203A Instruction Manual

14-1 How To Use Flow Measurement

Enable flow rate measurement
Switch flow rate measurement (Change the Function Table)
1 Press and hold the SAMPLE key until ba5fnc of the
function table is displayed, then release the key.
2 Press the SAMPLE key several times to display ap fnc .
3 Press the PRINT key to display
4 Press the RE-ZERO key several times to display
If you want to change the flow rate unit, go to "5".
If you want store the setting, go to "7".
If you want to cancel the flow function, press the RE-ZERO
key and return to
Setting of flow rate unit
5 Press the SAMPLE key to display
6 Press the RE-ZERO key to set the setting value.
Parameter
g / s (gram/sec)
0
g / m (gram/min)
1
g / h (gram/hour)
2
mL / s (milliliter/sec)
3
mL / m (milliliter/min)
4
mL / h (milliliter/hour)
5
7 Press the PRINT key to store.
8 Press the CAL key to return to the calculating display.
.
Contents
.
.
Store the setting
go to "7"
.
73
Press and hold
Press several times
Press several times
Set the flow rate unit
go to "5"