Changing Password - A&D GX-203A Instruction Manual

20-2 Changing Password

The password can be changed at "Password (
1. Press and hold the SAMPLE key in the weighing mode.
ba5fnc is displayed.
2. Press the
SAMPLE
3. Press the PRINT
display is OFF, press
press the
PRINT to set the displayed setting.
4. is displayed.
5. Press the PRINT
6. Press the SAMPLE
/
If the password is already registered at the login level, the
stability mark
7. Press the PRINT key to display the current password.
At factory settings, the password is
(the RE-ZERO key, four times)
8. Set the new password using the following keys.
The balance will turn automatically after no operation for
ten minutes.
MODE
key ................. Character
SAMPLE
key ............. Character
PRINT
key ............... Character
RE-ZERO key ........... Character
CAL
key ...................... Back key
CAL
key(long press) .. Delete password
9. Input four characters of the new password using these
keys.
10. The balance displays
blinking when "No" is selected.
(Press the CAL key to return to the 4th character
input.)
11. Press the RE-ZERO key to display 5ure:" y " e " 5
"YES" is blinking when "YES" is selected.
12. Press the PRINT key to store the new password when
displaying 5ure :" y " e " 5
When turning on the balance, input the new password.
Note
□ If the correct password is missing, the balance can not be used.
Record the correct password after changing.
□ Passwords that have already been registered by administrator
( ) can not be registered by users (
key several times until
key to display
RE-ZERO to switch to ON and
key to display the login level (
key to change the login level
.
is lit. (changeable)
5
p
"
5ure :ye5"
where "No" is
.
)" of the Function Table.
is displayed.
. If the
).
.
where
).
89
Change the login level
Display the current password
Return the 1 character
Enter the 4th
character
No key operation
in ten minutes
Setting key
Display off