Clock And Calendar Function - A&D GX-203A Instruction Manual

10-4 Clock And Calendar Function

The balance is equipped with a clock and calendar function.
When the Clock and Calender function（dout、5-td）is set, the time and
date are added to the output data.
Set or confirm the time and date as follows:
Operation
Step1 Press and hold the SAMPLE key until
table is displayed in the weighing mode, then release the key.
Step2 Press the
Step3 Press the PRINT key.
The balance enters the mode to confirm or set the time and date.
Confirming the time
Step4 The current time is displayed with all the digits blinking.
□ When the time is not correct and is to be changed, press the RE-ZERO key
and go to step 5.
□ When the time is correct and the date is to be confirmed, press the SAMPLE
key and go to step 6.
□ When the time is correct and the date does not need to be confirmed, press the
CAL key and go to step 8.
Setting the time
Step5 Set the time in 24-hour format using the following keys.
key .... To increase the value by one.
RE-ZERO
(＋)
key ......... To decrease the value by one.
MODE
(－)
key .......... To select the digits to change the value.
SAMPLE
...............
key
PRINT
..................
key
CAL
Confirming the date
Step6 The current date is displayed with all the digits blinking.
□ To change the display order of year (y), month (m) and day (d), press
the MODE key. The date is output in the order as specified.
□ When the date is not correct and is to be changed, press the RE-ZERO
key and go to step 7.
□ When the date is correct and the operation is to be finished, press the CAL
key and go to step 8.
□ When the time is to be confirmed again, press the SAMPLE key and go
back to step 4.
key several times to display
SAMPLE
The selected digits blink.
To store the new setting, display end and go to
step 6.
To cancel the new setting and go to step 6
ba5fnc
of the function
.
Cl adj
50
Press and hold
Press several times
Set the time
Set the time
Store the time
Confirm the date
Set the date
Store the date