Master Code Setting; Sirene Setting - Blaupunkt Q SERIES Installation And Operation Manual

• AC Fail Report: The Q-Hub will notify the user whenever detects that the connection to the mains was lost for
a certain time. Time range goes from 1min to 60min.
• Jamming Report: The Q-Hub will notify the user whenever detects a jamming attempt from frequency jam-
mers or blockers.
• Voice language: Use this function to change the language from the prompt voice messages of the Q-Hub.

4.7.4 Master Code Setting

Here you can change the master code. (Default code is 1111). We suggest you to change the default PIN code as
soon as possible.
The Master Code its only to access to the settings menu and can not be used to Arm / Disarm the system.
User PIN Code and Master PIN Code cannot be identical. If they are identical, the System Mode change will not
work.

4.7.5 Sirene Setting

If you have purchased an extra outdoor or indoor siren to expand the system, use the program siren functions to
change your siren settings. Select the desired option from the drop down menu and click the "OK" button from
the desired option. (Do not click the SUBMIT button). The panel will transmit a signal to the siren, if the signal
is received, the siren will emit a notify tone to confirm that the configuration was successful.
• Confirm: Determines whether the siren should emit a confirmation tone when the Q-Hub is armed or dis-
armed.
• Entry Sound: Determine whether the siren should emit a countdown sound along with Q-Hub during the
Entry Delay time.
• Siren Tamper: By selecting OFF it will disable temporarily the siren's tamper protection function for one hour.
You can also reactivate the siren tamper protection by selecting ON again. This function should be used to avoid
a tamper alarm whenever you wish to change the siren location or batteries.
33
Blaupunkt Competence Center Home Security