Blaupunkt Q SERIES Installation And Operation Manual page 19

Step 3:
Now under "Trigger Response" select the scenario you want link to the Door Contact. Save and confirm the
selection with "Send".
The scenario is now linked to the desired sensor. With each door opening the IRC-S2 will take a picture.
Example 2
Set up to turn on a lamp for 30 seconds via the Smart Power Switch Meter (PSM-S1) when the
Motion detector detects movement in the room.
Step 1:
Go to the Scene Menu (follow the steps in chapter "4.2.3.1 Creating a Scenario") , select the parameters
as follows: On "Action Type" select Device Action -> PSM-S1(Smart Power Switch Meter) -> Switch On For
-> 30 sec and press "Submit".
Step 2:
Once the scenario is created go to Settings> Devices. Click the three dots at the right of the desired motion
detector to open the sensor settings.
For images please refer to "Example 1"
Blaupunkt Competence Center Home Security
19