Away And Home Arm Settings; Panel Settings - Blaupunkt Q SERIES Installation And Operation Manual

4.7.2 Away and Home Arm Settings

• Entry Delay Time / Entry Delay Time 2: When an accessory set with Away Entry 1 or Away Entry 2 attribute
is triggered under Away or Home Arm Mode, the Q-Hub will begin entry countdown time according to length
set on this menu. Entry 1 attribute corresponds to Entry Delay Time length and Entry 2 attribute corresponds to
Entry Delay Time 2. When an accessory set with Home Access is triggered under Home Arm Mode, the Q-Hub
will begin entry countdown time according to length set on Home Entry Delay Time.
• Entry Delay Sound: Set the Entry Delay countdown volume.
• Exit Delay Time: When the Q-Hub changes to Away or Home Mode, it will begin counting down Exit Delay
time according to length set on this menu. When the time expires, the panel will enter set arm mode. All home
occupants must leave the detection area before Exit Delay Time expires or they will trigger an alarm.
• Exit Delay Sound: Set the Exit Delay countdown volume.

4.7.3 Panel Settings

• High Temperature: When the temperature rises above the set value, the Q-Hub will notify the user about the
High Temperature condition. If the temperature drops back under the set value again, the Q-Hub will send a
High Temperature Restore report to the user.
• Low Temperature: When temperature drops below the set value, the Q-Hub will notify the user about the
Low Temperature condition. If the temperature rises above the set value again, the Q-Hub will send Low Tem-
perature Restore report to the user.
32
Blaupunkt Competence Center Home Security