Blaupunkt Q SERIES Installation And Operation Manual page 28

• Attributes: The attribute parameter defines when the system should trigger an alarm
due to sensor activation.
The sub-menu Attributes contains the following options depending on the sensor type:
• Burglar: When an accessory set as Burglar is triggered, while the Q-Hub is in Away or
Home Arm Mode, an intruder alarm will be triggered immediately. If the accessory is trig-
gered during Entry or Exit countdown, the alarm will not be activated immediately.
• Home Omit: When an accessory set as Home Omit is triggered, while the Q-Hub is in Away
Arm Mode, an intruder alarm will be triggered immediately. When an accessory set as Home
Omit is triggered, while the Q-Hub is in Home Arm Mode, the alarm will not be triggered
• Entry 1 / Entry 2: When an accessory set as Entry 1 or Entry 2 is triggered, while the Q-Hub
is in Away or Home Arm Mode, a Entry Delay countdown will be triggered according to the
programmed Away Entry 1 Delay or Away Entry 2 Delay setting. (Please refer to 4.7 Panel
Setting to change the Entry Delay period).
The user must disarm the system before the countdown ends or the Q-Hub will trigger a
burglar alarm. Disarming the Q-Hub within the Entry Delay period will return the system to
Disarm Mode and no alarm will be reported.
• 24 h: With this attribute, the accessory is permanently armed regardless of the arm mode
from the Q-Hub .
• Home Access: When an accessory set as Home Access is triggered, while the Q-Hub is in
Home Arm Mode, an Entry Delay countdown will triggered according to the programmed
Home Entry 1 Delay. (Please refer to 4.7 Panel Setting to change the Entry Delay period).
The user must disarm the system before the countdown ends or the Q-Hub will trigger a
burglar alarm. Disarming the Q-Hub within the Entry Delay period will return the system to
Disarm Mode and no alarm will be reported
• Burglar Outdoor: This attribute its exclusive for the IRC-S2 (motion detector with photo
camera). When a IRC-S2 detects movement the detector will take pictures and you will be
notified via push notification, but it will not trigger the siren. This is also called "silent alarm".
• Personal Attack/Silent Panic: These attributes exist only for the remote control accesso-
ries. It determines the function of the panic button.
The attribute Person Attack triggers an alarm immediately.
The silent panic alerts you via push notification, but will not trigger the panel siren.
Note: If the panic button on the remote control is triggered, the control panel can no longer
be disarmed by the same remote control. This must be done with another device or the app.
Click Submit when you have finished setting the device and want to save it.
28
Blaupunkt Competence Center Home Security