Blaupunkt Q SERIES Installation And Operation Manual page 11

Alternatively, you can also use the double side adhesive tape provided to fix the DC-S1 the frame.
Door/Window
Mounting the motion detector with camera (Q3200 Kit)(IRC-S2)
The IRC-S2 is fixed to the wall with screws or double adhesive tape. The best location is on a corner. The motion
detector has a total of six mounting knock-outs where the plastic is thinner. The 2 central knock-outs are for
flat wall mounting, and the four side knock-outs are for corner mounting. For optimal performance install the
motion detector at 1.9-2m height.
1. Remove the IRC-S2 back cover and locate the mounting knock-outs.
2. Break through the knock-outs and use the knock-outs to mark the position on the wall or corner.
3. Drill holes into the wall or corner using the knock-outs as template.
4. Fix the IRC-S2 back cover onto the wall with the screws and plugs provided.
5. Place the IRC-S2 again onto the back cover. Make sure that the tamper protection is pushed down, otherwise
the tamper will be triggered.
Blaupunkt Competence Center Home Security
Corner Fixing
Knock-outs x4
Frame
Surface Fixing
Knock-outs x 2
11