Entering Your Atis Id - Raymarine RAY90 Installation And Operation Instruction Manual

5.12 Entering your ATIS ID

A unique ATIS ID must be entered before ATIS mode can be enabled.
From the Main menu.
1. Select Set-up.
2. Select ATIS set-up.
3. Select ATIS ID.
Not set will be displayed if no ATIS ID has been set.
The first digit is set to a '9' and cannot be changed, this is because all ATIS IDs start with a '9'.
As most ATIS IDs consist of a '9' followed by your 9 digit MMSI number; if your radio already has
an MMSI number the ATIS ID will be pre-filled in this format.
4. If the ATIS ID has been pre-filled, check it carefully against your issued ATIS ID.
5. To enter your ATIS ID manually, use the Channel Up and Channel Down buttons to cycle through
the available numbers and press OK to confirm each number and move to the next digit.
You should only enter the unique 10 digit ATIS ID provided by your licensing authority.
6. Press the Back button at any time to edit digits you have already entered.
7. Press and hold the OK button to display options to Move cursor back and forward through
the digits.
86