Pass-Through Panel Kit Mounting - Raymarine RAY90 Installation And Operation Instruction Manual

1. Check the selected location for the mounting holster, a clear flat area is required, with sufficient
space around it to place and remove the Handset.
2. Using a pencil, offer up the holster to the desired location and mark the location of the screw
holes on the mounting surface.
3. Drill the mounting holes using a suitable size drill bit.
4. Hold the holster in place and secure using the screws provided.
5. Place the Handset into the holster until it clicks into position.

Pass-through panel kit mounting

When installing handsets, the pass-through panel kit should be used to secure the cable to any
panels the cable has to pass through.
Installation 39