Wireless Handset Charging Holster - Power Connection; In-Line Fuse And Thermal Breaker Ratings - Raymarine RAY90 Installation And Operation Instruction Manual

4.11 Wireless handset charging holster – power connection
To enable inductive charging of the wireless handset, the holster requires a 12 V dc power supply.
The power cables should be connected via a distribution panel or, if required directly to a battery.
Refer to the Power distribution

In-line fuse and thermal breaker ratings

The wireless speaker is internally fused, however it is recommended that you fit an inline fuse on the
positive wire of your product's power cable or connect using a thermal breaker.
In-line fuse rating
2 A
Note:
• The suitable fuse rating for the thermal breaker is dependent on the number of devices you are
connecting. If in doubt consult an authorized Raymarine
62
section for guidance on connecting to a power supply.
Thermal breaker rating
2 A (refer to note below)
dealer.
®