Chapter 2: Operations; Introduction; The Handset Controls; Power The Radio On And Off - Raymarine Ray240 User Manual

Chapter 2:

2.1 Introduction

This chapter shows you how to operate the controls of the Ray240 and use it to
make the common Digital Selective Calling (DSC) calls.
Using the radio is simple. All of the functions, except adjusting the active speaker
volume are controlled from the handset.
Note: Differences for the European versions of the radio are shown in brackets in the text.

2.2 The handset controls

How do I

....power the radio On and Off?

....adjust the handset volume?

VOL
Operations
Power ON
16/9 16
PRESS the (
Power OFF
PRESS and HOLD the
The radio enters low power standby mode.
In standby mode the Ray240 is inoperative and will not receive DSC calls,
but your radio settings are retained.
To completely power down the Ray240, power must be switched of at
the source.
PRESS the volume key on the side of the handset to adjust the handset
volume up or down. Each press of the key raises or lowers the volume by
one level.
Note: It is not possible to adjust the volume while the radio is in 'Menu'
mode.
) button to turn on the radio.
16/9 16
( ) button for 2 seconds.
17