Receiving A Safety Call; Individual (Routine) Calls; Making An Individual Call - Raymarine RAY91 VHF Installation And Operation Instruction Manual

2. Select the channel for subsequent communication.
The call is transmitted. Once the call has been successfully transmitted 'Sent' is displayed
onscreen and the channel is changed to the specified channel.
3. Press the OK button.
4. Press and hold the PTT button and speak the following message:
SECURITE, SECURITE, SECURITE
ALL STATIONS, ALL STATIONS, ALL STATIONS
This is — MMSI of your vessel, name of your vessel repeated 3 times, call sign of your vessel.
Position — Your vessel's position.
Reason for call — state the reason for the safety call.
OUT

Receiving a safety call

When a safety call is received:
1. Select Show info from the options to review relevant call details.
2. Select Accept at any time to accept the call.
If auto channel change is turned on then the channel will automatically change after 10 seconds.
The radio is re-tuned to the specified channel.
3. Listen for the safety call message.

7.5 Individual (routine) calls

Individual calls can be made to contacts saved in your Phonebook or to any station by manually
entering an MMSI number.
Note:
When calling a coast station there is no need to select a channel for communication.
If a call cannot be accepted then a reason code is displayed.
No Reason
Congestion
Busy
Queue
Barred
No operator
Unavailable
Disable
Unable Ch
Unable mode

Making an Individual call

From the Individual Call menu: Menu > DSC Calls > Individual Call.
1. Select Phonebook to make a routine call to a contact saved in your Phonebook, or
2. Select Recent Calls to make a routine call to a contact that you have called recently, or
3. Select Enter MMSI to manually enter the MMSI number of the station you want to contact.
4. Select a contact or enter an MMSI manually and press the OK button.
5. Select the Channel you want to transmit the call on.
If the MMSI is a CSR then the radio will automatically tune to the correct Channel. The radio will
wait for an acknowledgement to be received.
6. If an acknowledgement is received, press the OK button.
Digital selective calling (DSC)
No reason given
Congestion at maritime switching centre
Station Busy
Queue indication
Station barred
No operator available
Operator temporarily unavailable
Equipment disabled
Unable to use proposed channel
Unable to use proposed mode
99