Control - PCE Health and Fitness PCE-PDA A100L Instructions For Use Manual

2. CONTROL

PCE-PDA is controlled by means of a 9-button foil keyboard, situated on the front side of the
gauge.
▪ On/Off (14) – serves for switching on and off of the gauge. For switching it on/off, it
is necessary to hold the button for 0.25s.
▪ Zero (12) – serves for resetting the offset, or rather modification of the initial
measuring level. When the inlets are disconnected from the measured pressure or
the positive inlets (2) and the zero (12) button. A successful reset is confirmed by a
sound signal. But if the pressure is connected and the zero (12) button is pressed,
the gauge will be reset to the currently connected pressure level, so called taring.
When the pressure is disconnected, the gauge will display the value of the tare
pressure, but with the opposite sign.
The zero (12) button also resets the numeric values of the adjustable items in the
menu. After the cursor is clicked on the numeric value and the zero (12) button is
held, the value will be adjusted to zero(s).
But zero does not necessarily have to be the default value!
▪ Menu (13) – serves as entry/return to the basic menu
▪ Light (17) – serves for switching on/off of the display backlights. Its adjustment is
described in the chapter 3.6.
▪ OK (15) – serves for the choice confirmation in the menu or for confirmation of the
adjusted values
▪ <^v> (16) – navigating buttons serve for the movement of the cursor in the menu
and adjusting the requested values. They can also have different uses according to
the chosen function. See the help line (11).
Instructions for use PCE-PDA
7