Advertisement
Do not expose the device to high temperatures, dampness or strong vibrations, nor to high humidity.
Avoid serve mechanical stress. The gas-leak detector is equipped with high-quality electronics and is,
therefore, very sensitive to impact, mechanical shock etc., which may destroy the gas sensor.
Furthermore, the gas sensor (1) may be damaged or destroyed by blowing strongly and directly onto it,
or by wetness
Handle the gas-leak detector with care.
If you are not sure about the operation, safety or connection of the devices, please contact an expert.
Keep the device out of reach of children.
4. Control elements
(7)
(1) Gas sensor
The sensor is the heart of the gas-leak detector. It recognizes gas and transforms this information into
electrical impulses gas and transforms this information into electrical impulses which ca be read out by the
analysis electronics
(2) Gas display LED
This LED shines when the device triggers an alarm due to the detection of gas.
(3) POWER display LED
This LED shines when the device is switched on and the batteries still have sufficient capacity. The LED
does not shine when the batteries are too low or flat.
(4) STATIC display LED
This LED shines as soon as the device recognizes a static discharge.
(5) Circuit breaker/circuit closer(ON/OFF)
This switches the device on and off. In the "ON" position the device is switched on and in the position the
device is switched on and in the "OFF" position the device is switched off.
(6) Carrier sling
The carrier sling is intended to prevent accidental slipping of the gas-leak detector.. Fasten the carrier loop
to the respective fastening eyelets at the end of the detector.
(7) Cover
The cover portents the sensitive gas sensor from damage. Remove the cover before operation and replace
it when you have finished operating the detector.
(8) Battery chamber
The battery chamber serves to hold the two micro batteries which are necessary for operation.
(9) Battery chamber cover
(10) Static aerial
5. Inserting the batteries and battery exchange
The device may be operated only with batteries.
Storage batteries are not suitable for operation.
(4)
(1)
(2)
(5)
(3)
(10)
(6)
AAA
AAA
(8)
info@tursdaletechnicalservices.co.uk
(9)
4
Advertisement
