Replacing The Friction Pad - Ricoh Aficio AP610 Maintenance Manual

Replacing Consumables and Maintenance Kit

Replacing the Friction Pad

Replace all friction pad of the tray. There are two kinds of friction pads. One is
for the paper tray (Tray 1), and the other are for the paper feed unit(s) (Tray 2,
3). The following procedure shows how to replacing friction pad of the paper tray
(Tray1).
A
Lift the paper tray slightly, and then pull it out until it stops.
B
Lift the front side of the tray, and then pull it out of the printer.
C
Remove paper from the paper tray. Place the tray upside down on a flat
surface.
45