Ricoh Aficio AP610 Maintenance Manual page 80

Troubleshooting
Messages/Second
messages
Ready
Remove Misfeed
Duplex Unit
/ Open Duplex
Unit Cover
Remove Misfeed
Internal Path
/ Open
Front Cover
Remove Misfeed
Paper Exit Cover
/ Open Paper
Exit Cover
Remove Misfeed
Paper Tray
/ Pull out Tray
Remove Paper
Standard Tray
Replace
Maintenance Kit
Replace
Toner Cartridge
Reset Duplex
Unit correctly
Description
The default ready message.
The printer is ready to use.
There is misfeed in the Duplex
Unit.
There is a misfeed in the print-
er.
There is a misfeed in the paper
exit cover.
Paper is jammed in the speci-
fied input paper tray.
The standard tray is full, and
the print job is suspended.
It is time to replace the mainte-
nance kit (friction pad, paper
feed roller, transfer roller and
fusing Unit).
The toner cartridge is not set
correctly or toner is almost run
out.
The toner dust is full.
A communication error sent
from the system unit to the du-
plex unit.
Solution
No action required.
Remove the misfed paper.
See p.104 "When "Remove Misfeed
Duplex Unit" Appears".
Remove the misfed paper.
See p.96 "When "Remove Misfeed In-
ternal Path" Appears".
Remove the misfed paper.
See p.99 "When "Remove Misfeed
Paper Exit Cover" Appears".
Remove the misfed paper.
See p.94 "When "Remove Misfeed
Paper Tray" Appears".
Remove paper from the standard tray,
and the print job will be resumed auto-
matically.
Replace the new maintenance kit.
See p.44 "Replacing the Maintenance
Kit".
Set the toner cartridge correctly.
See p.39 "Replacing the Toner Car-
tridge".
Prepare a new toner cartridge. If the
image density gets too light, replace
the toner cartridge with a new one.
See p.39 "Replacing the Toner Car-
tridge".
Set the duplex unit correctly. If the
problem persists, call your service
provider.
80